1

Niyə induksiya plitəsi işləmir??

İnduksiya plitəsi işləmir? What can be the causes

Before seeing the reasons why an induction hob does not work, o is good to understand how induction cookers work.

İnduksiya sobası necə işləyir?

Firing is guaranteed by the coils located under the ceramic glass top. The electrical energy that powers the coils generates a magnetic field that heats the pots.

In this way an induksiya sobası can guarantee an excellent efficiency, haqqında 90%, while a traditional gas cooker has an efficiency of 40%, as a good part of the heat produced is dispersed into the environment.

Əlavə olaraq, cooking with an induction hob is faster and more precise, because the heat spreads evenly over the pan. Sonra, the absence of flames avoids the risks of any gas leaks. Induction hobs offer many advantages, but like all appliances, they can be subject to breakdowns and malfunctions.

Why doesn't an induction hob work?

There can be several reasons why an induction hob does not turn on:

  • faulty power supply
  • soba sıxacları zədələnmiş və ya yanlış bağlanmışdır
  • qüsurlu elektrik lövhəsi

Bu hallarda, bacaran xüsusi bir texnikaya güvənmək məsləhətdir hər hansı bir uğursuzluğu yoxlayın and carry out the appropriate operations to solve it.

Bundan əlavə, mətbəxi idarə etdiyiniz klaviaturanı çirkləndirən maye və ya maddələr səbəbindən induksiya ocağının toxunma ilə tanınmaması baş verə bilər..

Bu problemi həll etmək üçün, just clean the hob with special detergents and a microfibre cloth. It may also happen that the induction hob does not recognize the pot. To cook on an induction hob, faktiki olaraq, it is necessary to use enameled iron, çuqun, and stainless steel pots and pans. Those in ceramic or terracotta should be avoided.

 

The induction hob does not heat up

 

Are the cooking zones of the induction hob no longer cooking properly? Let's try to investigate the possible causes behind this problem.

POSSIBLE CAUSES OF THIS PROBLEM:

USED POTS AND PANS ARE NOT SUITABLE

 

THE POWER OF THE INDUCTION COOKER IS TOO LOW

 

THE HOB HAS BEEN CONFIGURED INCORRECTLY

 

THE ELECTRICAL SYSTEM IS NOT UP TO STANDARD

 

THE ELECTRICAL CLAMP IS NOT TIGHTENED PROPERLY

 

THE ELECTRONIC BOARD IS FAULTY

 

ATTENTION
Before working on the appliance, make sure it is disconnected from the mains.
Danger of electrocution.
Wear suitable gloves,
cut hazard.

Used pots and pans are not suitable

5

 

If you use aluminum pots and pans, you should know that these are not suitable for induction cookers. For this type of appliance, it is preferable to prefer materials in cast iron or steel. It is in fact necessary that the pots have a relatively high ferrous content in order for them to heat up properly.

İpucu
To find out if the pots and pans are compatible with induction hobs, place a magnet on the lower end of the pan: if it sticks, they should be compatible.

Xəbərdarlıq: some stoves are more sensitive than others. For this reason, even if the tools have a specific symbol for induction, it is recommended to try them on the hob to verify that they are actually suitable.

The power of the induction cooker is too low

4

 

Each hob has a different power, which depends on the number of electronic boards it is equipped with: a hob can have, misal üçün, six cooking zones operating independently (maksimum gücdə), since they have an individual electronic power unit.

On other cookers, the cooking zones work in pairs since there is only one electronic unit for every two burners. This means that, by setting one zone to maximum power, eyni elektron lövhəni paylaşan digər ocaq eyni şeyi edə bilməyəcək və daha az güclü olacaq.

Pişirmə zonalarının mükəmməl ahəngdar işlədiyi ocaqlar da var: bütün brülörler tək bir enerji blokuna bağlıdır, və ocaqlardan yalnız biri buna görə maksimum gücdə işləyə bilər.

Ocaq üçün elektrik lövhəsi alın

Plitə səhv konfiqurasiya edilmişdir

6

 

Bəzi ocaqların işləməsi üçün proqramlaşdırıla biləcəyini bilməlisiniz 2,500 vat (16 amper) -ə 7,200 vat. If you find that your appliance is heating too little, it may be that the hob you just bought has been çox aşağı güclə qurulmuşdur. Cihazda qurulan gücü anlamaq və/və ya dəyişdirmək, təlimat kitabçasına müraciət etmək lazımdır!

Elektrik sistemi standartlara uyğun deyil

2

 

Optimal işləməsi üçün, induksiya ocaqları düzgün elektrik gərginliyi ilə təchiz olunmalıdır, tipik olaraq 230 volt. Some stoves will not work properly if the voltage is below 210 volt, kifayət qədər istiləşmədikləri üçün.

Very often this voltage problem occurs in winter since the system is stressed by domestic heating, consequently causing a significant voltage drop.

To check the voltage of the electrical system you can use a multimeter in voltmeter mode and measure the voltage present in the kitchen from any electrical outlet. Then place several pots on the stove and activate the cooking zones. If the voltage drops dramatically towards a value of 210 volt (və ya daha az), this is the reason why the induction cooker does not heat enough. Bu halda, elektrik təchizatçınızla məsləhətləşməyinizi məsləhət görürük.

Elektrik sıxacı düzgün şəkildə sıxılmamışdır

7

 

It may happen that the əlaqə sıxac on the hob or on the wall connection is not tightened correctly, causing only partial operation of the appliance. Bu halda, görünən birləşmə vintlərini sıxın və yenidən cəhd edin.

Sobanız yenidirsə və dörd yemək zonasından yalnız ikisi işləyir, cihazın səhv bağlandığı üçün kabel diaqramının düzgünlüyünü yoxlamağı məsləhət görürük.

Məsləhət budur
better not to always use the same cooking zone but to make them work in rotation; if the same burner is always used, its coil could overheat and deteriorate rapidly.

The electronic board is faulty

3

 

The electronic board undergoes a lot of stress during cooking. Over time, this could lead to a loss of stamina. Bu halda, the hob will indicate an error code on the display and will only operate at low power, therefore at temperatures that are not sufficient to heat a pot. If you have difficulty diagnosing this component, do not hesitate to contact our customer service or a technician authorized by the manufacturer of the appliance.

Şərhsiz

Şərh yazın