1

Miksi induktioliesi ei toimi??

Eikö induktiokeittotaso toimi? What can be the causes

Before seeing the reasons why an induktioliesi ei toimi, se is good to understand how induction cookers work.

Kuinka induktioliesi toimii?

Firing is guaranteed by the coils located under the lasinen keraaminen yläosa. The electrical energy that powers the coils generates a magnetic field that heats the pots.

In this way an induktioliesi can guarantee an excellent efficiency, noin 90%, while a traditional gas cooker has an efficiency of 40%, as a good part of the heat produced is dispersed into the environment.

Lisäksi, cooking with an induction hob is faster and more precise, because the heat spreads evenly over the pan. Sitten, the absence of flames avoids the risks of any gas leaks. Induction hobs offer many advantages, but like all appliances, ne voivat altistua rikkoutumisille ja toimintahäiriöille.

Miksi induktioliesi ei toimi??

There can be several reasons why an induktiokeittotaso ei käynnisty:

  • viallinen virtalähde
  • keittotason kiinnikkeet vaurioituneet tai liitetty väärin
  • viallinen sähkökortti

Näissä tapauksissa, on suositeltavaa luottaa erikoistuneeseen teknikkoon, joka osaa tarkista vika and carry out the appropriate operations to solve it.

Lisäksi, it may happen that the touch recognition of the induction hob does not work due to liquids or substances that have dirty the keyboard with which you control the kitchen.

To solve this problem, just clean the hob with special detergents and a microfibre cloth. It may also happen that the induction hob does not recognize the pot. To cook on an induction hob, itse asiassa, it is necessary to use enameled iron, valurauta, and stainless steel pots and pans. Those in ceramic or terracotta should be avoided.

 

The induction hob does not heat up

 

Eivätkö induktiolieden keittoalueet kypsene enää kunnolla? Let's try to investigate the possible causes behind this problem.

TÄMÄN ONGELMAN MAHDOLLISET SYYT:

KÄYTETYT KATTIOT JA ASTIAT EIVÄT OLE SOPIVIA

 

KÄYTTÖKYTKIMEN TEHO on liian alhainen

 

Liesi on konfiguroitu väärin

 

SÄHKÖJÄRJESTELMÄ EI OLE VAKIO

 

SÄHKÖLIITTIMET EI OLE KIRISTYNYT TÄYDELLISESTI

 

SÄHKÖKORTTI ON VIKA

 

HUOMIO
Ennen laitteen käsittelyä, varmista, että se on irrotettu verkkovirrasta.
Sähköiskun vaara.
Wear suitable gloves,
cut hazard.

Used pots and pans are not suitable

5

 

If you use aluminum pots and pans, you should know that these are not suitable for induction cookers. For this type of appliance, it is preferable to prefer materials in cast iron or steel. It is in fact necessary that the pots have a relatively high ferrous content in order for them to heat up properly.

Kärki
To find out if the pots and pans are compatible with induction hobs, place a magnet on the lower end of the pan: if it sticks, they should be compatible.

Warning: some stoves are more sensitive than others. For this reason, even if the tools have a specific symbol for induction, it is recommended to try them on the hob to verify that they are actually suitable.

The power of the induction cooker is too low

4

 

Each hob has a different power, which depends on the number of electronic boards it is equipped with: a hob can have, esimerkiksi, six cooking zones operating independently (maksimiteholla), since they have an individual electronic power unit.

On other cookers, the cooking zones work in pairs since there is only one electronic unit for every two burners. This means that, by setting one zone to maximum power, the other cooker that shares the same electronic board will not be able to do the same and will be less powerful.

There are also hobs where the cooking zones work in perfect harmony: all the burners are connected to a single power unit, and only one of the cookers can therefore operate at maximum power.

Buy a power board for the hob

The hob has been configured incorrectly

6

 

You need to know that some hobs can be programmed to operate from 2,500 watts (16 vahvistimet) kohteeseen 7,200 watts. If you find that your appliance is heating too little, it may be that the hob you just bought has been configured with too low a power. To understand the power that has been established and/or modify it on the device, it is necessary to consult the instruction manual!

The electrical system is not up to standard

2

 

To function optimally, induction hobs must be powered by the correct electrical voltage, typically 230 volttia. Some stoves will not work properly if the voltage is below 210 volttia, koska ne eivät lämpene tarpeeksi.

Hyvin usein tämä jänniteongelma esiintyy talvella, koska kotitalouksien lämmitys rasittaa järjestelmää, aiheuttaen siten merkittävän jännitehäviön.

Voit tarkistaa sähköjärjestelmän jännitteen käyttämällä yleismittaria volttimittaritilassa ja mittaamaan keittiössä olevan jännitteen mistä tahansa pistorasiasta. Aseta sitten useita kattiloita liedelle ja aktivoi keittoalueet. If the voltage drops dramatically towards a value of 210 volttia (tai vähemmän), this is the reason why the induction cooker does not heat enough. Tässä tapauksessa, we recommend that you consult your electricity supplier.

The electrical clamp is not tightened properly

7

 

It may happen that the connection clamp on the hob or on the wall connection is not tightened correctly, causing only partial operation of the appliance. Tässä tapauksessa, tighten the visible union screws and try again.

If your stove is new and only two of the four cooking zones work, suosittelemme tarkistamaan kytkentäkaavio oikein, koska laite on saattanut olla kytketty väärin.

Neuvoja Se on
on parempi olla käyttämättä aina samaa keittoaluetta, vaan saada ne toimimaan pyörivänä; if the same burner is always used, sen kela voi ylikuumentua ja vaurioitua nopeasti.

Elektroninen kortti on viallinen

3

 

The elektroninen levy undergoes a lot of stress during cooking. Over time, this could lead to a loss of stamina. Tässä tapauksessa, the hob will indicate an error code on the display and will only operate at low power, therefore at temperatures that are not sufficient to heat a pot. If you have difficulty diagnosing this component, älä epäröi ottaa yhteyttä asiakaspalveluumme tai laitteen valmistajan valtuuttamaan teknikkoon.

Ei kommentteja

Julkaise kommentti