1

Why doesn't the induction hob work?

Is the induction hob not working? What can be the causes

Before seeing the reasons why an induction hob does not work, það is good to understand how induction cookers work.

How does an induction hob work?

Firing is guaranteed by the coils located under the ceramic glass top. The electrical energy that powers the coils generates a magnetic field that heats the pots.

In this way an örvunar helluborð can guarantee an excellent efficiency, um 90%, while a traditional gas cooker has an efficiency of 40%, as a good part of the heat produced is dispersed into the environment.

Auk þess, cooking with an induction hob is faster and more precise, because the heat spreads evenly over the pan. Þá, the absence of flames avoids the risks of einhver gasleka.Framleiðsluhellur bjóða upp á marga kosti, en eins og öll tæki, þau geta orðið fyrir bilunum og bilunum.

Hvers vegna virkar ekki innblásturshelluborð?

There can be several reasons why an innleiðsluhellir kviknar ekki:

  • bilað aflgjafi
  • helluborðklemmur skemmdar eða rangt tengdar
  • bilað rafmagnstöflu

Í þessum tilvikum, það er ráðlegt að treysta á sérhæfðan tæknimann sem getur sannreyna allar bilanir and carry out the appropriate operations to solve it.

Ennfremur, það getur gerst að snertiskynning innleiðsluhellunnar virkar ekki vegna vökva eða efna sem hafa óhreint lyklaborðið sem þú stjórnar eldhúsinu með.

Til að leysa þetta vandamál, just clean the hob with special detergents and a microfibre cloth. It may also happen that the örvunar helluborð kannast ekki við pottinn. Að elda á innleiðsluhellu, reyndar, það er nauðsynlegt að nota enameled járn, steypujárn, og pottar og pönnur úr ryðfríu stáli. Those in ceramic or terracotta should be avoided.

 

The induction hob does not heat up

 

Are the cooking zones of the induction hob no longer cooking properly? Let's try to investigate the possible causes behind this problem.

POSSIBLE CAUSES OF THIS PROBLEM:

USED POTS AND PANS ARE NOT SUITABLE

 

THE POWER OF THE INDUCTION COOKER IS TOO LOW

 

THE HOB HAS BEEN CONFIGURED INCORRECTLY

 

THE ELECTRICAL SYSTEM IS NOT UP TO STANDARD

 

THE ELECTRICAL CLAMP IS NOT TIGHTENED PROPERLY

 

THE ELECTRONIC BOARD IS FAULTY

 

ATTENTION
Before working on the appliance, make sure it is disconnected from the mains.
Danger of electrocution.
Wear suitable gloves,
cut hazard.

Used pots and pans are not suitable

5

 

If you use aluminum pots and pans, you should know that these are not suitable for induction cookers. For this type of appliance, it is preferable to prefer materials in cast iron or steel. It is in fact necessary that the pots have a relatively high ferrous content in order for them to heat up properly.

Ábending
To find out if the pots and pans are compatible with induction hobs, place a magnet on the lower end of the pan: if it sticks, they should be compatible.

forðast allt orkutap: some stoves are more sensitive than others. For this reason, even if the tools have a specific symbol for induction, it is recommended to try them on the hob to verify that they are actually suitable.

The power of the induction cooker is too low

4

 

Each hob has a different power, which depends on the number of electronic boards it is equipped with: a hob can have, til dæmis, sex eldunarsvæði sem starfa sjálfstætt (við hámarksafl), þar sem þeir eru með einstaka rafræna aflgjafa.

Á öðrum eldavélum, the cooking zones work in pairs since there is only one electronic unit for every two burners. This means that, með því að stilla eitt svæði á hámarksafl, hitt eldavélin sem deilir sama rafeindabretti mun ekki geta gert það sama og verður minna öflugt.

Það eru líka helluborð þar sem eldunarsvæðin virka í fullkomnu samræmi: allir brennararnir eru tengdir við eina aflgjafa, og aðeins einn af eldavélunum getur því starfað við hámarksafl.

Kauptu rafmagnstöflu fyrir helluna

Helluborðið hefur verið rangt stillt

6

 

Þú þarft að vita að hægt er að forrita nokkrar hellur til að vinna úr 2,500 wött (16 magnarar) til 7,200 wött. If you find that your appliance is heating too little, it may be that the hob you just bought has been stillt með of lágu afli. Til að skilja kraftinn sem hefur verið komið á og/eða breyta honum á tækinu, það er nauðsynlegt að hafa samráð við leiðbeiningarnar!

Rafkerfið er ekki í samræmi við staðalinn

2

 

Að virka sem best, örvunarhellur verða að vera knúin af réttri rafspennu, venjulega 230 volt. Some stoves will not work properly if the voltage is below 210 volt, þar sem þeir hitna ekki nægilega vel.

Mjög oft kemur þetta spennuvandamál fram á veturna þar sem kerfið er stressað af húshitun, veldur þar af leiðandi verulegu spennufalli.

To check the voltage of the electrical system you can use a multimeter in voltmeter mode and measure the voltage present in the kitchen from any electrical outlet. Then place several pots on the stove and activate the cooking zones. If the voltage drops dramatically towards a value of 210 volt (eða minna), this is the reason why the induction cooker does not heat enough. Í þessu tilfelli, we recommend that you consult your electricity supplier.

The electrical clamp is not tightened properly

7

 

It may happen that the connection clamp on the hob or on the wall connection is not tightened correctly, causing only partial operation of the appliance. Í þessu tilfelli, herðu á sýnilegar skrúfur og reyndu aftur.

Ef eldavélin þín er ný og aðeins tvö af fjórum eldunarsvæðum virka, við mælum með því að athuga hvort raflögnin sé rétt þar sem heimilistækið gæti hafa verið rangt tengt.

Ráð Það er
betra að nota ekki alltaf sama eldunarsvæðið heldur láta það virka í snúningi; if the same burner is always used, its coil could overheat and deteriorate rapidly.

The electronic board is faulty

3

 

The electronic board undergoes a lot of stress during cooking. Over time, this could lead to a loss of stamina. Í þessu tilfelli, the hob will indicate an error code on the display and will only operate at low power, therefore at temperatures that are not sufficient to heat a pot. If you have difficulty diagnosing this component, do not hesitate to contact our customer service or a technician authorized by the manufacturer of the appliance.

Engar athugasemdir

Settu inn athugasemd