1

誘導ホブが機能しないのはなぜですか?

誘導ホブが機能していませんか? What can be the causes

Before seeing the reasons why an induction hob does not work, それ is good to understand how induction cookers work.

誘導ホブはどのように機能しますか?

Firing is guaranteed by the coils located under the ceramic glass top. The electrical energy that powers the coils generates a magnetic field that heats the pots.

In this way an 誘導コンロ can guarantee an excellent efficiency, 約 90%, while a traditional gas cooker has an efficiency of 40%, as a good part of the heat produced is dispersed into the environment.

加えて, cooking with an induction hob is faster and more precise, because the heat spreads evenly over the pan. それで, the absence of flames avoids the risks of any gas leaks. Induction hobs offer many advantages, but like all appliances, they can be subject to breakdowns and malfunctions.

Why doesn't an induction hob work?

There can be several reasons why an induction hob does not turn on:

  • faulty power supply
  • hob clamps damaged or incorrectly connected
  • defective electrical board

In these cases, it is advisable to rely on a specialized technician who can verify any failure and carry out the appropriate operations to solve it.

Furthermore, it may happen that the touch recognition of the induction hob does not work due to liquids or substances that have dirty the keyboard with which you control the kitchen.

To solve this problem, just clean the hob with special detergents and a microfibre cloth. It may also happen that the induction hob does not recognize the pot. To cook on an induction hob, 実際には, it is necessary to use enameled iron, 鋳鉄, and stainless steel pots and pans. Those in ceramic or terracotta should be avoided.

 

The induction hob does not heat up

 

Are the cooking zones of the induction hob no longer cooking properly? Let's try to investigate the possible causes behind this problem.

POSSIBLE CAUSES OF THIS PROBLEM:

USED POTS AND PANS ARE NOT SUITABLE

 

THE POWER OF THE INDUCTION COOKER IS TOO LOW

 

THE HOB HAS BEEN CONFIGURED INCORRECTLY

 

THE ELECTRICAL SYSTEM IS NOT UP TO STANDARD

 

THE ELECTRICAL CLAMP IS NOT TIGHTENED PROPERLY

 

THE ELECTRONIC BOARD IS FAULTY

 

ATTENTION
Before working on the appliance, make sure it is disconnected from the mains.
Danger of electrocution.
Wear suitable gloves,
cut hazard.

Used pots and pans are not suitable

5

 

If you use aluminum pots and pans, you should know that these are not suitable for induction cookers. For this type of appliance, it is preferable to prefer materials in cast iron or steel. It is in fact necessary that the pots have a relatively high ferrous content in order for them to heat up properly.

ヒント
To find out if the pots and pans are compatible with induction hobs, place a magnet on the lower end of the pan: if it sticks, they should be compatible.

Warning: some stoves are more sensitive than others. For this reason, even if the tools have a specific symbol for induction, it is recommended to try them on the hob to verify that they are actually suitable.

The power of the induction cooker is too low

4

 

Each hob has a different power, which depends on the number of electronic boards it is equipped with: a hob can have, 例えば, 独立して動作する6つの調理ゾーン (最大出力で), 彼らは個別の電力ユニットを持っているので.

他の炊飯器について, the cooking zones work in pairs since there is only one electronic unit for every two burners. This means that, 1つのゾーンを最大電力に設定する, 同じ電子ボードを共有する他の調理器具は同じことをすることができず、より強力ではなくなります.

調理ゾーンが完全に調和して機能するコンロもあります: すべてのバーナーは単一の電源ユニットに接続されています, したがって、最大出力で動作できるのは1つの炊飯器だけです。.

ホブ用のパワーボードを購入する

ホブが正しく構成されていません

6

 

いくつかのホブはから動作するようにプログラムできることを知っておく必要があります 2,500 ワット (16 アンペア) に 7,200 ワット. If you find that your appliance is heating too little, it may be that the hob you just bought has been 低電力で構成されている. 確立された電源を理解する、および/またはデバイス上でそれを変更する, 取扱説明書を参照する必要があります!

電気系統が標準に達していない

2

 

最適に機能するために, 誘導ホブは正しい電圧で給電する必要があります, 通常 230 ボルト. Some stoves will not work properly if the voltage is below 210 ボルト, 彼らは十分に熱くならないので.

システムが家庭用暖房によってストレスを受けているため、この電圧の問題は冬に発生することがよくあります, その結果、大幅な電圧降下が発生します.

To check the voltage of the electrical system you can use a multimeter in voltmeter mode and measure the voltage present in the kitchen from any electrical outlet. Then place several pots on the stove and activate the cooking zones. If the voltage drops dramatically towards a value of 210 ボルト (以下), this is the reason why the induction cooker does not heat enough. この場合, we recommend that you consult your electricity supplier.

The electrical clamp is not tightened properly

7

 

It may happen that the connection clamp on the hob or on the wall connection is not tightened correctly, causing only partial operation of the appliance. この場合, tighten the visible union screws and try again.

If your stove is new and only two of the four cooking zones work, we recommend checking that the wiring diagram is correct as the appliance may have been connected incorrectly.

Advice It is
better not to always use the same cooking zone but to make them work in rotation; if the same burner is always used, its coil could overheat and deteriorate rapidly.

The electronic board is faulty

3

 

NS electronic board undergoes a lot of stress during cooking. Over time, this could lead to a loss of stamina. この場合, the hob will indicate an error code on the display and will only operate at low power, therefore at temperatures that are not sufficient to heat a pot. If you have difficulty diagnosing this component, do not hesitate to contact our customer service or a technician authorized by the manufacturer of the appliance.

コメントはありません

コメントを投稿