1

Firwat funktionnéiert d'Induktiounskach net?

Wierkt d'Induktiounskach net? What can be the causes

Before seeing the reasons why an Induktiounskach funktionnéiert net, et is good to understand how induction cookers work.

How does an induction hob work?

Firing is guaranteed by the coils located under the ceramic glass top. The electrical energy that powers the coils generates a magnetic field that heats the pots.

In this way an Induktiounskach can guarantee an excellent efficiency, iwwer 90%, while a traditional gas cooker has an efficiency of 40%, as a good part of the heat produced is dispersed into the environment.

Zousätzlech, cooking with an induction hob is faster and more precise, because the heat spreads evenly over the pan. Dann, the absence of flames avoids the risks of any gas leaks. Induction hobs offer many advantages, but like all appliances, they can be subject to breakdowns and malfunctions.

Why doesn't an induction hob work?

There can be several reasons why an induction hob does not turn on:

  • faulty power supply
  • hob clamps damaged or incorrectly connected
  • defective electrical board

In these cases, it is advisable to rely on a specialized technician who can verify any failure and carry out the appropriate operations to solve it.

Furthermore, it may happen that the touch recognition of the induction hob does not work due to liquids or substances that have dirty the keyboard with which you control the kitchen.

To solve this problem, just clean the hob with special detergents and a microfibre cloth. It may also happen that the induction hob does not recognize the pot. To cook on an induction hob, tatsächlech, it is necessary to use enameled iron, Goss, and stainless steel pots and pans. Déi a Keramik oder Terracotta solle vermeit ginn.

 

D'Induktiounskach gëtt net erhëtzt

 

Sinn d'Kachzonen vun der Induktiounskach net méi richteg gekacht?? Let's try to investigate the possible causes behind this problem.

MÉIGLECH Ursaachen VUN DER PROBLEM:

BENOTZT POTS A PANNEN SINN NET GESCHAFT

 

D'Muecht vum INDUCTION COOKER ASS ZE LOW

 

DEN HOB HUET UGESCHAFT KONFIGURÉIERT

 

DEN ELEKTRISCHE SYSTEM ASS NET OP STANDARD

 

DEN ELEKTRISCHE KLAMP GËTT NET GÉIEReg fest

 

DEN ELEKTRONISCHE BOARD IS FALT

 

OPGEPASST
Before working on the appliance, make sure it is disconnected from the mains.
Danger of electrocution.
Wear suitable gloves,
cut hazard.

Used pots and pans are not suitable

5

 

If you use aluminum pots and pans, you should know that these are not suitable for induction cookers. For this type of appliance, it is preferable to prefer materials in cast iron or steel. It is in fact necessary that the pots have a relatively high ferrous content in order for them to heat up properly.

Tipp
Fir erauszefannen ob d'Dëppen an d'Pannen mat Induktiounskachelen kompatibel sinn, Plaz e Magnéit um ënneschten Enn vun der Pan: wann et stécht, si solle kompatibel sinn.

Opgepasst: some stoves are more sensitive than others. Dofir, och wann d'Tools e spezifescht Symbol fir Induktioun hunn, et ass recommandéiert se op der Kachplack ze probéieren fir z'iwwerpréiwen ob se tatsächlech passend sinn.

D'Kraaft vum Induktiounskoker ass ze niddereg

4

 

All Kachplack huet eng aner Kraaft, dat hänkt vun der Unzuel vun elektronesche Boards of, mat deenen et ausgestatt ass: en Uewen kann hunn, zum Beispill, six cooking zones operating independently (bei maximaler Muecht), since they have an individual electronic power unit.

On other cookers, the cooking zones work in pairs since there is only one electronic unit for every two burners. This means that, by setting one zone to maximum power, the other cooker that shares the same electronic board will not be able to do the same and will be less powerful.

There are also hobs where the cooking zones work in perfect harmony: all the burners are connected to a single power unit, and only one of the cookers can therefore operate at maximum power.

Buy a power board for the hob

The hob has been configured incorrectly

6

 

You need to know that some hobs can be programmed to operate from 2,500 watts (16 Ampere) zu 7,200 watts. If you find that your appliance is heating too little, it may be that the hob you just bought has been configured with too low a power. To understand the power that has been established and/or modify it on the device, it is necessary to consult the instruction manual!

The electrical system is not up to standard

2

 

Fir optimal ze funktionéieren, Induktiounskachplazen musse mat der korrekter elektrescher Spannung ugedriwwe ginn, typesch 230 volts. Some stoves will not work properly if the voltage is below 210 volts, well se net genuch waarm ginn.

Ganz dacks trëtt dëse Spannungsprobleem am Wanter op well de System ënner Hausheizung gestresst ass, Konsequent verursaacht e bedeitende Spannungsfall.

Fir d'Spannung vum elektresche System z'iwwerpréiwen kënnt Dir e Multimeter am Voltmeter Modus benotzen an d'Spannung an der Kichen präsent moossen aus engem elektreschen Outlet. Then place several pots on the stove and activate the cooking zones. If the voltage drops dramatically towards a value of 210 volts (oder manner), this is the reason why the induction cooker does not heat enough. An dësem Fall, we recommend that you consult your electricity supplier.

The electrical clamp is not tightened properly

7

 

It may happen that the connection clamp on the hob or on the wall connection is not tightened correctly, causing only partial operation of the appliance. An dësem Fall, tighten the visible union screws and try again.

If your stove is new and only two of the four cooking zones work, we recommend checking that the wiring diagram is correct as the appliance may have been connected incorrectly.

Advice It is
better not to always use the same cooking zone but to make them work in rotation; if the same burner is always used, its coil could overheat and deteriorate rapidly.

The electronic board is faulty

3

 

Den elektronesch Verwaltungsrot undergoes a lot of stress during cooking. Over time, this could lead to a loss of stamina. An dësem Fall, d'Kachplack weist e Feelercode um Display un a funktionnéiert nëmme mat gerénger Kraaft, therefore at temperatures that are not sufficient to heat a pot. If you have difficulty diagnosing this component, zéckt net eise Clientsservice ze kontaktéieren oder en Techniker autoriséiert vum Hiersteller vum Apparat.

No Comments

Post A Comment