1

Почему не работает индукционная плита?

Индукционная плита не работает?? What can be the causes

Before seeing the reasons why an induction hob does not work, Это is good to understand how induction cookers work.

Как работает индукционная плита?

Firing is guaranteed by the coils located under the ceramic glass top. The electrical energy that powers the coils generates a magnetic field that heats the pots.

In this way an индукционная плита can guarantee an excellent efficiency, о 90%, while a traditional gas cooker has an efficiency of 40%, as a good part of the heat produced is dispersed into the environment.

Кроме того, cooking with an induction hob is faster and more precise, because the heat spreads evenly over the pan. Затем, the absence of flames avoids the risks of любые утечки газа.Индукционные варочные панели обладают множеством преимуществ, но как и вся бытовая техника, они могут подвергаться поломкам и сбоям в работе.

Почему не работает индукционная плита?

There can be several reasons why an индукционная плита не включается:

  • неисправный источник питания
  • зажимы варочной панели повреждены или неправильно подсоединены
  • неисправная электрическая плата

В этих случаях, желательно полагаться на специализированного специалиста, который может проверить любой сбой and carry out the appropriate operations to solve it.

Furthermore, it may happen that the touch recognition of the induction hob does not work due to liquids or substances that have dirty the keyboard with which you control the kitchen.

To solve this problem, just clean the hob with special detergents and a microfibre cloth. It may also happen that the induction hob does not recognize the pot. To cook on an induction hob, по факту, it is necessary to use enameled iron, чугун, and stainless steel pots and pans. Those in ceramic or terracotta should be avoided.

 

The induction hob does not heat up

 

Are the cooking zones of the induction hob no longer cooking properly? Let's try to investigate the possible causes behind this problem.

POSSIBLE CAUSES OF THIS PROBLEM:

USED POTS AND PANS ARE NOT SUITABLE

 

THE POWER OF THE INDUCTION COOKER IS TOO LOW

 

THE HOB HAS BEEN CONFIGURED INCORRECTLY

 

THE ELECTRICAL SYSTEM IS NOT UP TO STANDARD

 

THE ELECTRICAL CLAMP IS NOT TIGHTENED PROPERLY

 

THE ELECTRONIC BOARD IS FAULTY

 

ATTENTION
Before working on the appliance, make sure it is disconnected from the mains.
Danger of electrocution.
Wear suitable gloves,
cut hazard.

Used pots and pans are not suitable

5

 

If you use aluminum pots and pans, you should know that these are not suitable for induction cookers. For this type of appliance, it is preferable to prefer materials in cast iron or steel. It is in fact necessary that the pots have a relatively high ferrous content in order for them to heat up properly.

Подсказка
Чтобы узнать, совместимы ли кастрюли и сковороды с индукционными варочными панелями, поместите магнит на нижний конец сковороды: если он прилипнет, они должны быть совместимы.

Предупреждение: some stoves are more sensitive than others. По этой причине, даже если инструменты имеют специальный символ для индукции, рекомендуется примерить их на плите, чтобы убедиться, что они действительно подходят.

Мощность индукционной плиты слишком мала.

4

 

У каждой варочной панели разная мощность, что зависит от количества электронных плат, которыми он оснащен: плита может иметь, Например, шесть конфорок, работающих независимо (на максимальной мощности), поскольку у них есть индивидуальный электронный блок питания.

На других плитах, the cooking zones work in pairs since there is only one electronic unit for every two burners. This means that, установив одну зону на максимальную мощность, другая плита, использующая ту же электронную доску, не сможет сделать то же самое и будет менее мощной..

Есть также варочные панели, в которых зоны нагрева работают в идеальной гармонии.: все горелки подключены к единому блоку питания, and only one of the cookers can therefore operate at maximum power.

Buy a power board for the hob

The hob has been configured incorrectly

6

 

You need to know that some hobs can be programmed to operate from 2,500 Вт (16 усилители) к 7,200 Вт. If you find that your appliance is heating too little, it may be that the hob you just bought has been configured with too low a power. To understand the power that has been established and/or modify it on the device, it is necessary to consult the instruction manual!

The electrical system is not up to standard

2

 

To function optimally, induction hobs must be powered by the correct electrical voltage, typically 230 вольт. Some stoves will not work properly if the voltage is below 210 вольт, as they do not heat up enough.

Very often this voltage problem occurs in winter since the system is stressed by domestic heating, consequently causing a significant voltage drop.

To check the voltage of the electrical system you can use a multimeter in voltmeter mode and measure the voltage present in the kitchen from any electrical outlet. Then place several pots on the stove and activate the cooking zones. If the voltage drops dramatically towards a value of 210 вольт (или менее), this is the reason why the induction cooker does not heat enough. В таком случае, we recommend that you consult your electricity supplier.

The electrical clamp is not tightened properly

7

 

It may happen that the connection clamp on the hob or on the wall connection is not tightened correctly, causing only partial operation of the appliance. В таком случае, tighten the visible union screws and try again.

If your stove is new and only two of the four cooking zones work, we recommend checking that the wiring diagram is correct as the appliance may have been connected incorrectly.

Advice It is
better not to always use the same cooking zone but to make them work in rotation; if the same burner is always used, its coil could overheat and deteriorate rapidly.

The electronic board is faulty

3

 

В electronic board undergoes a lot of stress during cooking. Over time, this could lead to a loss of stamina. В таком случае, варочная панель отобразит код ошибки на дисплее и будет работать только на малой мощности., therefore at temperatures that are not sufficient to heat a pot. If you have difficulty diagnosing this component, не стесняйтесь обращаться в нашу службу поддержки клиентов или к техническому специалисту, уполномоченному производителем устройства..

Без комментариев

Оставить комментарий