1

Why doesn't the induction hob work?

Is the induction hob not working? What can be the causes

Before seeing the reasons why an induction hob does not work, to is good to understand how induction cookers work.

Ako funguje indukčná varná doska?

Firing is guaranteed by the coils located under the sklokeramická doska. The electrical energy that powers the coils generates a magnetic field that heats the pots.

In this way an indukčná varná doska can guarantee an excellent efficiency, o 90%, while a traditional plynový varič has an efficiency of 40%, pretože značná časť vyrobeného tepla je rozptýlená do životného prostredia.

Navyše, varenie s indukčnou varnou doskou je rýchlejšie a presnejšie, because the heat spreads evenly over the pan. Potom, the absence of flames avoids the risks of akékoľvek úniky plynu.Indukčné varné dosky ponúkajú mnoho výhod, ale ako všetky spotrebiče, môžu podliehať poruchám a poruchám.

Prečo nefunguje indukčná varná doska??

There can be several reasons why an indukčná varná doska sa nezapne:

  • chybné napájanie
  • svorky varnej dosky poškodené alebo nesprávne zapojené
  • chybná elektrická doska

V týchto prípadoch, je vhodné spoľahnúť sa na špecializovaného technika, ktorý môže overte prípadné zlyhanie and carry out the appropriate operations to solve it.

Furthermore, it may happen that the touch recognition of the induction hob does not work due to liquids or substances that have dirty the keyboard with which you control the kitchen.

To solve this problem, just clean the hob with special detergents and a microfibre cloth. It may also happen that the induction hob does not recognize the pot. To cook on an induction hob, v skutočnosti, it is necessary to use enameled iron, liatina, and stainless steel pots and pans. Vyhnúť by sa mali keramickým alebo terakotovým.

 

Indukčná varná doska sa nezahrieva

 

Varné zóny indukčnej varnej dosky už nevaria správne?? Let's try to investigate the possible causes behind this problem.

MOŽNÉ PRÍČINY TOHTO PROBLÉMU:

POUŽITÉ Črepníky a panvice nie sú vhodné

 

SILA INDUKČNÉHO TEPLA je príliš nízka

 

VARNÁ DOSKA JE NAKONFIGUROVANÁ NESPRÁVNE

 

ELEKTRICKÝ SYSTÉM NIE JE ŠTANDARDNÝ

 

ELEKTRICKÁ PRÍPOJKA NIE JE SPRÁVNE UTiahnutá

 

ELEKTRONICKÁ DOSKA JE PORUCHA

 

POZOR
Pred prácou na spotrebiči, uistite sa, že je odpojený od elektrickej siete.
Nebezpečenstvo zásahu elektrickým prúdom.
Noste vhodné rukavice,
nebezpečenstvo porezania.

Použité hrnce a panvice nie sú vhodné

5

 

Ak používate hliníkové hrnce a panvice, you should know that these are not suitable for induction cookers. For this type of appliance, it is preferable to prefer materials in cast iron or steel. It is in fact necessary that the pots have a relatively high ferrous content in order for them to heat up properly.

Tip
To find out if the pots and pans are compatible with induction hobs, place a magnet on the lower end of the pan: if it sticks, they should be compatible.

Pozor: some stoves are more sensitive than others. For this reason, even if the tools have a specific symbol for induction, it is recommended to try them on the hob to verify that they are actually suitable.

The power of the induction cooker is too low

4

 

Each hob has a different power, which depends on the number of electronic boards it is equipped with: a hob can have, napríklad, six cooking zones operating independently (pri maximálnom výkone), since they have an individual electronic power unit.

On other cookers, the cooking zones work in pairs since there is only one electronic unit for every two burners. This means that, by setting one zone to maximum power, the other cooker that shares the same electronic board will not be able to do the same and will be less powerful.

There are also hobs where the cooking zones work in perfect harmony: all the burners are connected to a single power unit, a iba jeden z sporákov teda môže pracovať na maximálny výkon.

Kúpte si elektrickú dosku k varnej doske

Varná doska bola nesprávne nakonfigurovaná

6

 

Musíte vedieť, že niektoré varné dosky je možné naprogramovať tak, aby fungovali 2,500 wattov (16 zosilňovače) do 7,200 wattov. If you find that your appliance is heating too little, it may be that the hob you just bought has been nakonfigurovaný na príliš nízky výkon. Pochopiť výkon, ktorý bol zavedený, a/alebo ho upraviť na zariadení, je potrebné si preštudovať návod na obsluhu!

The electrical system is not up to standard

2

 

To function optimally, induction hobs must be powered by the correct electrical voltage, typically 230 voltov. Some stoves will not work properly if the voltage is below 210 voltov, as they do not heat up enough.

Very often this voltage problem occurs in winter since the system is stressed by domestic heating, consequently causing a significant voltage drop.

To check the voltage of the electrical system you can use a multimeter in voltmeter mode and measure the voltage present in the kitchen from any electrical outlet. Then place several pots on the stove and activate the cooking zones. If the voltage drops dramatically towards a value of 210 voltov (alebo menej), this is the reason why the induction cooker does not heat enough. V tomto prípade, we recommend that you consult your electricity supplier.

The electrical clamp is not tightened properly

7

 

It may happen that the connection clamp on the hob or on the wall connection is not tightened correctly, causing only partial operation of the appliance. V tomto prípade, utiahnite viditeľné spojovacie skrutky a skúste to znova.

Ak je váš sporák nový a fungujú iba dve zo štyroch varných zón, odporúčame skontrolovať, či je schéma zapojenia správna, pretože spotrebič mohol byť nesprávne pripojený.

Rada To je
radšej nepoužívajte vždy rovnakú varnú zónu, ale nechajte ich pracovať striedavo; if the same burner is always used, its coil could overheat and deteriorate rapidly.

The electronic board is faulty

3

 

The electronic board undergoes a lot of stress during cooking. Over time, this could lead to a loss of stamina. V tomto prípade, the hob will indicate an error code on the display and will only operate at low power, therefore at temperatures that are not sufficient to heat a pot. If you have difficulty diagnosing this component, do not hesitate to contact our customer service or a technician authorized by the manufacturer of the appliance.

Bez komentára

Uverejniť komentár