1

Varför fungerar inte induktionshällen?

Fungerar inte induktionshällen? What can be the causes

Before seeing the reasons why an induktionshällen fungerar inte, den is good to understand how induction cookers work.

Hur fungerar en induktionshäll?

Firing is guaranteed by the coils located under the keramisk glasskiva. The electrical energy that powers the coils generates a magnetic field that heats the pots.

In this way an induktionshäll can guarantee an excellent efficiency, handla om 90%, while a traditional gasspis has an efficiency of 40%, eftersom en bra del av värmen som produceras sprids ut i miljön.

För övrigt, matlagning med en induktionshäll är snabbare och mer exakt, because the heat spreads evenly over the pan. Sedan, the absence of flames avoids the risks of any gas leaks. Induction hobs offer many advantages, but like all appliances, they can be subject to breakdowns and malfunctions.

Why doesn't an induction hob work?

There can be several reasons why an induction hob does not turn on:

  • faulty power supply
  • hob clamps damaged or incorrectly connected
  • defective electrical board

In these cases, it is advisable to rely on a specialized technician who can verify any failure and carry out the appropriate operations to solve it.

vidare, det kan hända att induktionshällens beröringsigenkänning inte fungerar på grund av vätskor eller ämnen som har smutsat tangentbordet som du styr köket med.

För att lösa det här problemet, just clean the hob with special detergents and a microfibre cloth. It may also happen that the induktionshäll känner inte igen grytan. Att laga mat på en induktionshäll, faktiskt, det är nödvändigt att använda emaljerat järn, gjutjärn, och grytor och kokkärl i rostfritt stål. Those in ceramic or terracotta should be avoided.

 

The induction hob does not heat up

 

Are the cooking zones of the induction hob no longer cooking properly? Let's try to investigate the possible causes behind this problem.

POSSIBLE CAUSES OF THIS PROBLEM:

USED POTS AND PANS ARE NOT SUITABLE

 

THE POWER OF THE INDUCTION COOKER IS TOO LOW

 

THE HOB HAS BEEN CONFIGURED INCORRECTLY

 

THE ELECTRICAL SYSTEM IS NOT UP TO STANDARD

 

THE ELECTRICAL CLAMP IS NOT TIGHTENED PROPERLY

 

THE ELECTRONIC BOARD IS FAULTY

 

ATTENTION
Before working on the appliance, make sure it is disconnected from the mains.
Danger of electrocution.
Wear suitable gloves,
cut hazard.

Used pots and pans are not suitable

5

 

If you use aluminum pots and pans, you should know that these are not suitable for induction cookers. For this type of appliance, it is preferable to prefer materials in cast iron or steel. It is in fact necessary that the pots have a relatively high ferrous content in order for them to heat up properly.

Dricks
To find out if the pots and pans are compatible with induction hobs, place a magnet on the lower end of the pan: if it sticks, they should be compatible.

Varning: some stoves are more sensitive than others. For this reason, even if the tools have a specific symbol for induction, it is recommended to try them on the hob to verify that they are actually suitable.

The power of the induction cooker is too low

4

 

Each hob has a different power, which depends on the number of electronic boards it is equipped with: a hob can have, till exempel, six cooking zones operating independently (vid maximal effekt), since they have an individual electronic power unit.

On other cookers, the cooking zones work in pairs since there is only one electronic unit for every two burners. This means that, by setting one zone to maximum power, the other cooker that shares the same electronic board will not be able to do the same and will be less powerful.

There are also hobs where the cooking zones work in perfect harmony: all the burners are connected to a single power unit, and only one of the cookers can therefore operate at maximum power.

Buy a power board for the hob

The hob has been configured incorrectly

6

 

You need to know that some hobs can be programmed to operate from 2,500 watts (16 förstärkare) till 7,200 watts. If you find that your appliance is heating too little, it may be that the hob you just bought has been configured with too low a power. To understand the power that has been established and/or modify it on the device, it is necessary to consult the instruction manual!

The electrical system is not up to standard

2

 

To function optimally, induction hobs must be powered by the correct electrical voltage, typically 230 Volt. Some stoves will not work properly if the voltage is below 210 Volt, as they do not heat up enough.

Very often this voltage problem occurs in winter since the system is stressed by domestic heating, consequently causing a significant voltage drop.

För att kontrollera spänningen i elsystemet kan du använda en multimeter i voltmeterläge och mäta spänningen i köket från valfritt eluttag. Lägg sedan flera grytor på spisen och aktivera kokzonerna. Om spänningen sjunker dramatiskt mot ett värde av 210 Volt (eller mindre), detta är anledningen till att induktionsspisen inte värmer tillräckligt. I detta fall, Vi rekommenderar att du kontaktar din elleverantör.

Den elektriska klämman är inte åtdragen ordentligt

7

 

It may happen that the anslutningsklämma on the hob or on the wall connection is not tightened correctly, causing only partial operation of the appliance. I detta fall, tighten the visible union screws and try again.

If your stove is new and only two of the four cooking zones work, we recommend checking that the wiring diagram is correct as the appliance may have been connected incorrectly.

Advice It is
better not to always use the same cooking zone but to make them work in rotation; if the same burner is always used, dess spole kan överhettas och försämras snabbt.

Det elektroniska kortet är felaktigt

3

 

De Elektrisk bräda undergoes a lot of stress during cooking. Over time, this could lead to a loss of stamina. I detta fall, hällen indikerar en felkod på displayen och fungerar bara med låg effekt, therefore at temperatures that are not sufficient to heat a pot. If you have difficulty diagnosing this component, tveka inte att kontakta vår kundtjänst eller en tekniker som är auktoriserad av tillverkaren av apparaten.

Inga kommentarer

Posta en kommentar