1

Why doesn't the induction hob work?

Is the induction hob not working? What can be the causes

Before seeing the reasons why an induction hob does not work, це is good to understand how induction cookers work.

How does an induction hob work?

Firing is guaranteed by the coils located under the ceramic glass top. The electrical energy that powers the coils generates a magnetic field that heats the pots.

In this way an індукційна плита can guarantee an excellent efficiency, про 90%, while a traditional gas cooker has an efficiency of 40%, as a good part of the heat produced is dispersed into the environment.

В додаток, cooking with an induction hob is faster and more precise, because the heat spreads evenly over the pan. Потім, the absence of flames avoids the risks of будь -які витоки газу.Індукційні плити мають багато переваг, але як і вся техніка, вони можуть бути схильні до поломок і несправностей.

Чому індукційна плита не працює?

There can be several reasons why an індукційна плита не включається:

  • несправний блок живлення
  • затискачі для плити пошкоджені або неправильно підключені
  • несправна електрична плата

У цих випадках, бажано покластися на спеціаліста, який це може перевірити будь -які збої and carry out the appropriate operations to solve it.

Furthermore, it may happen that the touch recognition of the induction hob does not work due to liquids or substances that have dirty the keyboard with which you control the kitchen.

To solve this problem, just clean the hob with special detergents and a microfibre cloth. It may also happen that the induction hob does not recognize the pot. To cook on an induction hob, фактично, it is necessary to use enameled iron, чавун, and stainless steel pots and pans. Those in ceramic or terracotta should be avoided.

 

The induction hob does not heat up

 

Are the cooking zones of the induction hob no longer cooking properly? Let's try to investigate the possible causes behind this problem.

POSSIBLE CAUSES OF THIS PROBLEM:

USED POTS AND PANS ARE NOT SUITABLE

 

THE POWER OF THE INDUCTION COOKER IS TOO LOW

 

THE HOB HAS BEEN CONFIGURED INCORRECTLY

 

THE ELECTRICAL SYSTEM IS NOT UP TO STANDARD

 

THE ELECTRICAL CLAMP IS NOT TIGHTENED PROPERLY

 

THE ELECTRONIC BOARD IS FAULTY

 

ATTENTION
Перед початком роботи над приладом, переконайтесь, що він від'єднаний від електромережі.
Небезпека ураження електричним струмом.
Одягніть відповідні рукавички,
скоротити небезпеку.

Використані каструлі та каструлі не підходять

5

 

Якщо ви використовуєте алюмінієві каструлі та сковорідки, you should know that these are not suitable for induction cookers. For this type of appliance, it is preferable to prefer materials in cast iron or steel. It is in fact necessary that the pots have a relatively high ferrous content in order for them to heat up properly.

Порада
To find out if the pots and pans are compatible with induction hobs, place a magnet on the lower end of the pan: if it sticks, they should be compatible.

Warning: some stoves are more sensitive than others. For this reason, even if the tools have a specific symbol for induction, it is recommended to try them on the hob to verify that they are actually suitable.

The power of the induction cooker is too low

4

 

Each hob has a different power, which depends on the number of electronic boards it is equipped with: a hob can have, наприклад, шість конфорок, що працюють незалежно (на максимальній потужності), оскільки вони мають індивідуальний електронний блок живлення.

На інших плитах, the cooking zones work in pairs since there is only one electronic unit for every two burners. This means that, шляхом встановлення однієї зони на максимальну потужність, інша плита, яка має спільну електронну плату, не зможе зробити те ж саме і буде менш потужною.

Існують також варильні панелі, де варильні зони працюють в ідеальній гармонії: всі пальники підключені до одного блоку живлення, тому тільки одна з плит може працювати на максимальній потужності.

Купіть плату живлення для варильної панелі

Плита налаштована неправильно

6

 

Ви повинні знати, що деякі варильні панелі можна запрограмувати на роботу 2,500 ват (16 підсилювачі) до 7,200 ват. If you find that your appliance is heating too little, it may be that the hob you just bought has been налаштовано з надто низькою потужністю. Для розуміння встановленої потужності та/або зміни її на пристрої, необхідно ознайомитися з інструкцією з експлуатації!

The electrical system is not up to standard

2

 

To function optimally, induction hobs must be powered by the correct electrical voltage, typically 230 вольт. Some stoves will not work properly if the voltage is below 210 вольт, as they do not heat up enough.

Very often this voltage problem occurs in winter since the system is stressed by domestic heating, consequently causing a significant voltage drop.

To check the voltage of the electrical system you can use a multimeter in voltmeter mode and measure the voltage present in the kitchen from any electrical outlet. Then place several pots on the stove and activate the cooking zones. If the voltage drops dramatically towards a value of 210 вольт (менш), this is the reason why the induction cooker does not heat enough. In this case, we recommend that you consult your electricity supplier.

The electrical clamp is not tightened properly

7

 

It may happen that the connection clamp on the hob or on the wall connection is not tightened correctly, causing only partial operation of the appliance. In this case, tighten the visible union screws and try again.

If your stove is new and only two of the four cooking zones work, we recommend checking that the wiring diagram is correct as the appliance may have been connected incorrectly.

Advice It is
better not to always use the same cooking zone but to make them work in rotation; if the same burner is always used, its coil could overheat and deteriorate rapidly.

The electronic board is faulty

3

 

The electronic board undergoes a lot of stress during cooking. Over time, this could lead to a loss of stamina. In this case, the hob will indicate an error code on the display and will only operate at low power, therefore at temperatures that are not sufficient to heat a pot. If you have difficulty diagnosing this component, do not hesitate to contact our customer service or a technician authorized by the manufacturer of the appliance.

Без коментарів

Залишити коментар